Using 3M™ Scotchbond™ Universal Adhesive, 3M™ Filtek™ One Bulk Fill Restorative, and the 3M™ Sof-Lex™ Spiral Finishing and Polishing system.
Replacing failing composite restorations can be easily done with the use of modern bulk fill composites.
The use of multilayering technique for restoring molars and premolars can be a tricky procedure due to the possibility of trapping bubbles between composite layers. In addition, it can result in unfavorable dental anatomy which may subsequently lead to functional problems. The use of bulk fill composites could reduce the risk of problems due to the simplicity of the process. As the placement process is shorter, we have more time to focus on the anatomy and function of our restoration.
In this case we show the replacement of a failing composite restoration in first left lower molar, replaced by a bulk fill composite restoration. Utilizing just a few steps and within only 31 minutes from start to finish, bulk fill composite is a great practice tool to use.
After the cavity preparation, the cavity is selectively etched with phosphoric acid.
3M™ Scotchbond™ Universal Adhesive is applied to all cavity walls.
Gentle air drying is applied to evaporate the solvent, and the adhesive is cured according to instructions.
3M™ Filtek™ One Bulk Fill Restorative is applied in one increment of 4mm.
The occlusal anatomy is modeled, and the restoration is light cured according to instructions.
In this case, the patient’s natural staining is mimicked using a staining resin.
After final curing, the restoration is finished and polished with the 3M™ Sof-Lex™ Spiral Finishing and Polishing system.
The rubber dam is removed.
Final occlusion is checked to ensure there are no premature contact points.
Refer to Instructions for Use (IFU) for complete product information. Results may vary.
Using 3M™ Scotchbond™ Universal Adhesive and 3M™ Filtek™ Supreme Ultra Universal Restorative.
Using 3M™ Single Bond Universal Adhesive, 3M™ Filtek™ Supreme Flowable Restorative, 3M™ Filtek™ Universal Restorative, 3M™ Elipar™ Deep Cure-S LED…
Using 3M™ Protemp™ 4 Temporization Material, 3M™ Scotchbond™ Universal Plus Adhesive, and 3M™ RelyX™ Universal Resin Cement.
