before and after
June 16, 2022
Prof. Dr. Jansen Ozaki,

Clinical Case: Simplifying an esthetic restoration in anterior teeth using resin composites.

Using 3M™ Scotchbond™ Universal Plus Adhesive, 3M™ Elipar™ DeepCure-S LED Curing Light, 3M™ Filtek™ Universal Restorative and 3M™ Sof-Lex™ Diamond Polishing System.

About the Case

Patient presented a previous restoration with wear and a fractured restoration. Patient was unsatisfied with the clinical aspect of the smile.
The treatment plan consisted in restoring the teeth in a simple technique, following the adequate shape and function. Considering the monochromatic aspect of the teeth to be restored, a resin composite with universal opacity 3M™ Filtek™ Universal Restorative was selected, tailoring shape and contour to reestablish the aimed esthetic expected by the patient.
Results: Patient was very satisfied with the obtained results.

Initial situation

Initial Situation: Tooth showing the wear on the resin composite and adjacent tooth with fractured/chipped restoration.

Preparation

Close up view to show the aspect of the abraded and fractured previous restorations.

3D printed view

After etching for 15 seconds, rinsed and gently dried, 3M™ Scotchbond™ Universal Plus Adhesive was rubbed in for 20 seconds, air-dried for 5 seconds and light cured with 3M™ Elipar™ DeepCure-S LED Curing Light for 10 seconds.

3M™ Ketac™ Universal Aplicap™ Glass Ionomer Restorative

Application of 3M™ Filtek™ Universal Restorative – shade A1 and light curing following IFU. For the easy handling and biosafety, capsules presentation were chosen.

Application of adhesive

Lines were drawn with graphite as a reference for the surface texture. Observe the transitional line angles (proximal area) and the lines for secondary anatomy.

Preparation ready for bonding

Clinical aspect after finishing and polishing using 3M™ Sof-Lex™ Diamond Polishing Spiral Wheels.

bite-wing radiograph

After occlusal adjustments, final restorations.

You May Also Like

Clinical Case: Smile makeover with ceramic veneers to improve esthetics.

Using 3M™ Protemp™ Plus Temporization Material, 3M™ Imprint™ 4 VPS Impression Material, 3M™ RelyX™ Try-In Paste, 3M™ RelyX™ Ceramic Primer,…

Clinical Case: Simplifying cementation of glass ceramic restorations for an anterior implant and adjacent veneer.

Using 3M™ Scotchbond™ Universal Plus Adhesive, and 3M™ RelyX™ Universal Resin Cement.

Clinical Case: Anterior Class 4 Composite and Diastema Closure on Adjacent Anterior Central Incisor Teeth Using a Universal Adhesive and Nano Particle Composite.

Using 3M™ Scotchbond™ Universal Plus Adhesive, 3M™ Elipar™ DeepCure-S LED Curing Light, 3M™ Filtek™ Supreme Ultra Universal Restorative and 3M™…