Using: 3M™ Scotchbond™ Universal Etchant, 3M™ Scotchbond™ Universal Adhesive, 3M™ Elipar™ DeepCure-S LED Curing Light, 3M™ Filtek™ Supreme XTE Universal Restorative, 3M™ Filtek™ Supreme XTE Flowable Restorative, 3M™ Sof-Lex™ Contouring and Polishing Discs, 3M™ Sof-Lex™ Pre-Polishing Spiral and 3M™ Sof-Lex™ Diamond Polishing Spiral
Patient was not satisfied with current anterior restorations (maxillary central incisors). Patient also expressed dissatisfaction with shade and surface texture.
Creating smooth and natural- looking restorations for patients who demand the highest level of esthetics can be challenging. The use of materials that mimic the shade and opacity of dentin and enamel is critical for success.
Refer to Instructions for Use (IFU) for complete product information. Results may vary.
Learn more about the products used in this clinical case
|
Initial situation: The patient was unhappy with the esthetics of their maxillary central incisors.
After tooth preparation, the teeth were etched for 15 seconds using 3M™ Scotchbond™ Universal Etchant.
3M™ Scotchbond™ Universal Adhesive was scrubbed onto the surface of the prepared teeth for 20 seconds, gently air dried for 5 seconds, and light cured* for 10 seconds with the 3M™ Elipar™ DeepCure-S LED Curing Light.
A silicone matrix was used to create the palatal wall with 3M™ Filtek™ Supreme XTE Universal Restorative, shade CT, and light cured*.
The interproximal enamel layer was built with 3M™ Filtek™ Supreme XTE Universal Restorative, shade A3E, and light cured*. For the incisal halo, 3M™ Filtek™ Supreme XTE Flowable Restorative, shade W, was used.
Application of the dentin layer using 3M™ Filtek™ Supreme XTE Universal Restorative, shade A1D, and light cured*. For volume control, a Misura instrument was used to leave a 0.5mm space for the facial enamel.
Creation of mamelons and the application of a small portion of 3M™ Filtek™ Supreme XTE Universal Restorative, shade CT, was added between the dentin layer and the incisal halo, and light cured*, to enhance translucency at the incisal edge.
The final layer of 3M™ Filtek™ Supreme XTE Universal Restorative, shade A3E, was applied and light cured.
3M™ Sof-Lex™ Contouring and Polishing Discs are used to design and define the restoration anatomy.
Pre-polishing of restoration with 3M™ Sof-Lex™ Pre-Polishing Spiral.
Final polishing with the 3M™ Sof-Lex™ Diamond Polishing Spiral creates a smooth finish and high-gloss polish.
Natural looking final restoration.
*Light cured according to the manufacturer’s guidelines
Using 3M™ Single Bond Universal Adhesive, 3M™ Filtek™ Supreme Flowable Restorative, 3M™ Filtek™ Universal Restorative, 3M™ Elipar™ Deep Cure-S LED…
Using 3M™ Scotchbond™ Universal Adhesive, 3M™ Filtek™ One Bulk Fill Restorative, and the 3M™ Sof-Lex™ Spiral Finishing and Polishing system.
Using 3M™ Protemp™ 4 Temporization Material, 3M™ Scotchbond™ Universal Plus Adhesive, and 3M™ RelyX™ Universal Resin Cement.
