Using 3M™ Express™ XT VPS Impression Material, 3M™ Single Bond Universal Adhesive, 3M™ Elipar™ DeepCure-L LED Curing Light, 3M™ Filtek™ Universal Restorative, the 3M™ Sof-Lex™ Finishing and Polishing System, and the 3M™ Sof-Lex™ Diamond Polishing System.
About the case:
Patient had an esthetic complaint about a diastema between her upper central incisors.
Challenge:
Obtain adequate contours and an excellent finish and polish, especially near the gingiva. The composite must be easy to sculpt and polish.
Initial situation: diastema between central incisors.
Wax-up of the clinical case. A guide was made with silicone impression material (3M™ Express™ XT VPS Impression Material).
Prophylaxis, acid etching and application of 3M™ Single Bond Universal Adhesive (20 seconds), followed by solvent evaporation and a 10-second light cure* with 3M™ Elipar™ DeepCure-L LED Curing Light.
Insert the first layer of 3M™ Filtek™ Universal Restorative, shade B1. The composite’s consistency facilitates handling. 10-second light cure* with 3M™ Elipar™ DeepCure-L LED Curing Light.
Final appearance of the restoration, using layers of 3M™ Filtek™ Universal Restorative, shade B1, each layer cured for 10 seconds* using a 3M™ Elipar™ DeepCure-L LED Curing Light.
Finish with 3M™ Sof-Lex™ Finishing and Polishing System (orange disc, medium grit).
Pre-polishing with the 3M™ Sof-Lex™ Diamond Polishing System (beige spiral).
Completing the final polish with the 3M™ Sof-Lex™ Diamond Polishing System (purple spiral).
Incisal view of the restoration.
Palatal view of the restoration.
Final appearance of the restoration.
Observe the color match obtained with 3M™ Filtek™ Universal Restorative, mimicking the dental substrate and delivering a natural-looking polish and appearance.
Refer to Instructions for Use (IFU) for complete product information. Results may vary.
Using 3M™ Scotchbond™ Universal Plus Adhesive, 3M™ Filtek™ Universal Restorative, and 3M™ Sof-Lex™ Polishing System.
Using 3M™ Filtek™ Easy Match Universal and 3M™ Scotchbond™ Universal Plus Adhesive
Using 3M™ Filtek™ Easy Match and 3M™ Scotchbond™ Universal Plus Adhesive
